mkobetic

1 words ~1 min January 1, 0001

https://www.electromaker.io/blog/article/ultimate-guide-to-arduino-nano-every-model-reviewed-compared

1611 words ~8 mins January 1, 0001

Bootloaders are probably not the first thing one would recommend a beginner to dive into, but if you’re dead set on running Forth on your board, you’ll have to contend with it whether you want to or not. The details discussed below are from Atmel Atmega MCUs (I was using ATmega 2560), but the same concepts likely apply to other MCU families as well. What is a bootloader Bootloader is a bit of code that is pre-loaded into the MCUs flash memory and is the first thing that runs when the MCU starts up.

29 words ~1 min January 1, 0001

Debugging .s key drop Insert this at a point in the source where you want the execution to dump the stack and wait for you to press the key

29 words ~1 min January 1, 0001

Arduino UNO R4 Wifi https://store.arduino.cc/products/uno-r4-wifi ARM7M - Cortex M4 https://github.com/arduino/ArduinoCore-renesas/tree/main/libraries/Arduino_FreeRTOS Whirlwind tour of ARM assembly https://www.coranac.com/tonc/text/asm.htm Intro to ARM assembly https://azeria-labs.com/writing-arm-assembly-part-1/ ESP32 wifi chip https://documentation.espressif.com/esp-at/en/latest/esp32/index.html Tutorial https://docs.freenove.com/projects/fnk0094/en/latest/ (https://github.com/Freenove/Freenove_Super_Starter_Kit_for_Control_Board_V5) https://forum.digikey.com/t/theory-behind-the-arduino-uno-r4-wifi-12-x-8-led-display-matrix/43827